Records

Online Publishing @ NISCAIR

View Archive Info

  • » <strong>Optimal selection of process parameters to reduce vibration during end...
    Rajeswari, Sellamani ; School of Mechanical Engineering, SASTRA University, Thanjavur 613 401, Tamil Nadu, India
    Sivasakthivel, Perumal Subramaniyan; School of Mechanical Engineering, SASTRA University, Thanjavur 613 401, Tamil Nadu, India
    2021-01-11
    View Record | View Original
  • » <strong>Deposition of TiC-Cu composite coating on AISI 304 stainless steel by EDC...
    D, Tijo ; Department of Mechanical Engineering, National Institute of Technology Rourkela, Odisha, India
    Kumari, Shilpi ; Department of Mechanical Engineering, National Institute of Technology Rourkela, Odisha, India
    Masanta, Manoj ; Department of Mechanical Engineering, National Institute of Technology Rourkela, Odisha, India
    2021-01-11
    View Record | View Original
  • » <strong>Neural network modeling of forces in drilling of glass/epoxy composites...
    Dhawan, Vikas ; Shree Guru Gobind Singh Tricentenary University, Gurugram – 122 505, India
    Debnath, Kishore ; Department of Mechanical Engineering, National Institute of Technology Meghalaya, Shillong – 793 003, India
    Singh, Inderdeep ; Department of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, Roorkee – 247 667, India
    Singh, Sehijpal ; Department of Mechanical Engineering, Guru Nanak Dev Engineering College, Ludhiana – 141 006, India
    2021-01-11
    View Record | View Original
  • » <strong>Barkhausen noise analysis of friction stir processed steel...
    Yusufzai, Mohd Zaheer Khan; Department of Mechanical Engineering, Indian Institute of Technology (BHU), Varanasi, India
    Raja, Avinash Ravi; Department of Mechanical Engineering, Indian Institute of Technology (BHU), Varanasi, India
    Gupta, Sanjay Kumar; Department of Mechanical Engineering, Indian Institute of Technology (BHU), Varanasi, India
    Vashista, Meghanshu ; Department of Mechanical Engineering, Indian Institute of Technology (BHU), Varanasi, India
    2021-01-11
    View Record | View Original
  • » <strong>Sustainable mortar mix using recycled fines obtained from construction...
    Soni, Nancy ; Department of Civil Engineering, Jaypee University of Engineering and Technology, Guna-473226, India
    Shukla, Dharmendra Kumar; Department of Civil Engineering, Jaypee University of Engineering and Technology, Guna-473226, India
    2021-01-11
    View Record | View Original
  • » <strong>Exploring grindability of Ti-6Al-4V using an indigenously developed...
    Mahata, Sirsendu ; Department of Mechanical Engineering, Kalyani Government Engineering College, Kalyani 741235, India
    Mukhopadhyay, Manish ; Department of Mechanical Engineering, Kalyani Government Engineering College, Kalyani 741235, India
    Banerjee, Ayan ; Department of Mechanical Engineering, Kalyani Government Engineering College, Kalyani 741235, India
    Kundu, Arnab ; Department of Mechanical Engineering, Kalyani Government Engineering College, Kalyani 741235, India
    Mandal, Bijoy ; Department of Mechanical Engineering, Kalyani Government Engineering College, Kalyani 741235, India
    Das, Santanu ; Department of Mechanical Engineering, Kalyani Government Engineering College, Kalyani 741235, India
    2021-01-11
    View Record | View Original
  • » <strong>Interfacial improvement of carbon fiber/polyoxymethylene composites by...
    Zhu, Quping ; School of Civil Engineering, Chongqing Institute of Engineering, Chongqing 400054, China
    2021-01-11
    View Record | View Original
  • » <strong>Effects of adding aluminium in zinc bath on Co-Zn interfacial...
    Liu, Yongxiong ; Key Laboratory of Materials Design and Preparation Technology of Hunan Province, School of Materials Science and Engineering, Xiangtan University, Hunan 411105, PR China
    Yin, Fucheng ; Key Laboratory of Materials Design and Preparation Technology of Hunan Province, School of Materials Science and Engineering, Xiangtan University, Hunan 411105, PR China
    Li, Zhi ; Key Laboratory of Materials Design and Preparation Technology of Hunan Province, School of Materials Science and Engineering, Xiangtan University, Hunan 411105, PR China
    Chen, Zhu ; Key Laboratory of Materials Design and Preparation Technology of Hunan Province, School of Materials Science and Engineering, Xiangtan University, Hunan 411105, PR China
    Zhao, Manxiu ; Key Laboratory of Materials Design and Preparation Technology of Hunan Province, School of Materials Science and Engineering, Xiangtan University, Hunan 411105, PR China
    Long, Zhaohui ; Key Laboratory of Materials Design and Preparation Technology of Hunan Province, School of Materials Science and Engineering, Xiangtan University, Hunan 411105, PR China
    2021-01-11
    View Record | View Original
  • » <strong>Average austenite grain size evolution simulation during multi-pass shape...
    Qingqiang, He ; School of Mechanical Engineering, China University of petroleum, Qingdao 266580, P.R. China
    Han, Zhu ; School of Mechanical Engineering, China University of petroleum, Qingdao 266580, P.R. China
    Jianguo, Liu ; School of Mechanical Engineering, China University of petroleum, Qingdao 266580, P.R. China
    Wanli, Chai ; School of Mechanical Engineering, China University of petroleum, Qingdao 266580, P.R. China
    Chunli, Geng ; School of Mechanical Engineering, China University of petroleum, Qingdao 266580, P.R. China
    Junyou, Zhao ; School of Mechanical Engineering, China University of petroleum, Qingdao 266580, P.R. China
    2021-01-11
    View Record | View Original
  • » <strong>Prediction of tribological characteristics of powder metallurgy Ti and W...
    Kandavel, Thanjavur Krishnamoorthy; School of Mechanical Engineering, Shanmugha Arts, Science, Technology and Research Academy (SASTRA Deemed to be University), Thanjavur, Tamil Nadu 613 401, India
    Kumar, Thangaiyan Ashok; School of Mechanical Engineering, Shanmugha Arts, Science, Technology and Research Academy (SASTRA Deemed to be University), Thanjavur, Tamil Nadu 613 401, India
    Varamban, Emaya ; School of Mechanical Engineering, Shanmugha Arts, Science, Technology and Research Academy (SASTRA Deemed to be University), Thanjavur, Tamil Nadu 613 401, India
    2021-01-11
    View Record | View Original
  • » <strong>A probabilistic model of acoustic emissions generated during compression...
    Sagar, R Vidya; Department of Civil Engineering, Indian Institute of Science, Bangalore 560 012, India
    2021-01-11
    View Record | View Original
  • » <strong>Pulse electrodeposition of Ni/nano-SiC composite coatings: Effect of...
    Heidari, Gholamreza ; Esfarayen University of Technology, Esfarayen, North Khorasan, Iran
    Khoei, Mohammad Mosavie; Department of Mining and Metallurgy, Amir Kabir University of Technology, Tehran, Iran
    2021-01-11
    View Record | View Original
  • » <strong>Microstructure and mechanical properties of directionally solidified...
    Wu, Houpu ; School of Resources and Materials, Northeastern University at Qinhuangdao 066004, Qinhuangdao, China
    Yang, Lianwei ; School of Resources and Materials, Northeastern University at Qinhuangdao 066004, Qinhuangdao, China
    Lin, Xiaoping ; School of Resources and Materials, Northeastern University at Qinhuangdao 066004, Qinhuangdao, China
    Liu, Jie ; School of Resources and Materials, Northeastern University at Qinhuangdao 066004, Qinhuangdao, China
    Chai, Tao ; School of Resources and Materials, Northeastern University at Qinhuangdao 066004, Qinhuangdao, China
    Dong, Yun ; School of Resources and Materials, Northeastern University at Qinhuangdao 066004, Qinhuangdao, China
    2021-01-11
    View Record | View Original
  • » <strong>Modelling and optimization of injection molding process for PBT/PET parts...
    Kumar, Sagar ; Department of Mechanical Engineering, Malaviya National Institute of Technology Jaipur, Rajasthan – 302017, India
    Singh, Amit Kumar; Department of Mechanical Engineering, Malaviya National Institute of Technology Jaipur, Rajasthan – 302017, India
    Pathak, Vimal Kumar; Department of Mechanical Engineering, Manipal University Jaipur, Jaipur, Rajasthan – 303007, India
    2021-01-11
    View Record | View Original
  • » <strong>Study on dry-sliding wear (DSW) of uncoated IN800 super alloy and sol-gel...
    Kumar, Dipak ; Mechanical Engineering Department, Raj Kumar Goel Institute of Technology, Ghaziabad 201003, Lucknow, India
    Pandey, Kailash Narayan; Mechaical Engineering Department, Motilal Nehru National Institute of Technology Allahabad, Allahabad 211004, India
    2021-01-11
    View Record | View Original
  • » <strong>Wear properties and synthesis of CrFeNiMoTi high entropy alloy coatings...
    Islak, Serkan ; Mechanical Engineering, Faculty of Engineering and Architecture, Kastamonu University, Kastamonu 37150, Turkey
    Eski, Özkan ; Mechanical Engineering, Faculty of Engineering and Architecture, Kastamonu University, Kastamonu 37150, Turkey
    Koç, Vahdettin ; Vocational High School of Technical Sciences, Adıyaman University, Adıyaman 02000, Turkey
    Özorak, Cihan ; Metallurgical and Materials Engineering, Faculty of Engineering and Architecture, Kastamonu University, Kastamonu 37150, Turkey
    2021-01-11
    View Record | View Original
  • » <p>Performance Evaluation of the Cloud-based QR Code Identity Tag System with...
    Uzun, Vassilya ; Department of Computer Engineering, Istanbul Gedik University Istanbul, Turkey
    2021-01-11
    View Record | View Original
  • » <p class="TitleMain" style="text-align: justify;">Ultrasound...
    Mishra, Smrutimayee ; Department of Agricultural Processing and Food Engineering, CAET, OUAT, Bhubaneswar-753 001, India
    Rayaguru, Kalpana ; Department of Agricultural Processing and Food Engineering, CAET, OUAT, Bhubaneswar-753 001, India
    Nayak, Prakash Kumar; Department of Food Engineering and Technology, Central Institute of Technology, Kokrajhar, Assam 783 370, India
    2021-01-11
    View Record | View Original
  • » <p class="Articletitle">Optimizing Plastic Extrusion Process via Grey...
    Karaoglan, Aslan Deniz; Balikesir University, Department of Industrial Engineering
    Sahlan Plastics Co. (Balıkesir –Turkey)
    2021-01-11
    View Record | View Original
  • » A New Efficient Method for the detection of intrusion in 5 G andbeyond Networks using...
    Yadav, Vikash ; ABES Engineering College, Ghaziabad
    Rahul, Mayur ; UIET CSJm Kanpur
    Yadav, Rishika ; Department of computer Science Engineering, Graphic Era Hill University, Dehradun
    2023-08-21
    View Record | View Original
  • » <p><strong>DEVELOPMENT OF CONTINUOUS FEED EQUIPMENT FOR ALOEVERA WHOLE GEL...
    Naik, Ravindra ; ICAR Central Institute of Agricultural Engineering
    Annamalai, SJK ; ICAR Central Institute of Agricultural Engineering
    Indian Council of Agricultural Research, New Delhi and Department of Science &Technology, New Delhi
    2021-01-11
    View Record | View Original
  • » Organobentonite as an efficient and reusable adsorbent for cationic dyes removal from...
    Patanjali, Pooja ; University of Delhi
    Chopra, Indu ; ICAR-Indian Agricultural Research Institute, New Delhi
    Mandal, Abhishek ; ICAR-Indian Agricultural Research Institute, New Delhi
    Singh, Rajeev ; University of Delhi
    University of Delhi
    2021-01-11
    View Record | View Original
  • » <p>Castor Oil and Acrylate based Copolymers as Greener Additives for Lubricating...
    Hoque, Mainul ; Natural Product and Polymer Chemistry Laboratory, Department of Chemistry, University of North Bengal, Darjeeling 734 013, India
    Roy, Dibakar ; Natural Product and Polymer Chemistry Laboratory, Department of Chemistry, University of North Bengal, Darjeeling 734 013, India
    Ghosh, Pranab ; Natural Product and Polymer Chemistry Laboratory, Department of Chemistry, University of North Bengal, Darjeeling 734 013, India
    2021-01-11
    View Record | View Original
  • » <p>Machine Learning based Electromyography Signal Classification with Optimized...
    Khera, Preeti
    Ahuja, Parul
    Kumar, Neelesh ; CSIR-Central Scientific Instruments Organisation (CSIO)
    CSIR New Delhi
    2021-01-11
    View Record | View Original
  • » <p class="papertitle">Characterization of Alzheimer MRI Image based on...
    Pandiani, R ; School of EEE, Sathyabama Institute of Science and Technology, Chennai, Tamil Nadu, India
    Kumari, S Lalitha; School of EEE, Sathyabama Institute of Science and Technology, Chennai, Tamil Nadu, India
    2021-01-11
    View Record | View Original
3351 - 3375 of 6862 Items    << < 130 131 132 133 134 135 136 137 138 139 > >>